Updated Nov 18, 2026· 5 min read

Key takeaways

  • Core RO process: Every tier is built around the same fundamental steps: sediment filtration to catch particulates, carbon filtration to reduce chlorine and odor/taste issues, and the RO membrane itself to reduce dissolved solids.
  • Added stages: Higher stage-count systems typically add extra sediment or carbon passes and, in some versions, a remineralization or alkaline stage that adds minerals back in after the RO membrane strips them out along with contaminants.
  • Tank vs. tankless: Traditional systems use a pressurized storage tank under the sink so filtered water is ready on demand; tankless designs filter on demand instead, trading some flow-rate characteristics for a smaller footprint.
  • Filter replacement schedule: The maker specifies a replacement interval for each filter stage and the membrane separately; sediment and carbon filters generally need more frequent replacement than the membrane itself.
  • Installation space: Tank-based systems need more under-sink cabinet space for the tank itself, which matters in smaller kitchens or apartments.

A standard 5-stage under-sink reverse osmosis system fits most households wanting cleaner drinking water from one kitchen tap, while a 10-stage or alkaline/remineralizing version suits buyers who specifically want added minerals back into the filtered water, and a tankless design fits those short on under-sink cabinet space. Express Water’s reverse osmosis lineup is built around that same basic filtration core across tiers, so the real decision is which added stages and tank format match the household’s space and water-quality priorities.

Express Water sells reverse osmosis drinking water systems in several configurations, generally built around a multi-stage filtration process: sediment and carbon pre-filters, a reverse osmosis membrane, and in some versions, post-filtration or remineralization stages. This guide breaks down what differs between the tiers and what to check for a specific home’s plumbing and water supply.

What the Stage Count Actually Changes

  • Core RO process: Every tier is built around the same fundamental steps: sediment filtration to catch particulates, carbon filtration to reduce chlorine and odor/taste issues, and the RO membrane itself to reduce dissolved solids.
  • Added stages: Higher stage-count systems typically add extra sediment or carbon passes and, in some versions, a remineralization or alkaline stage that adds minerals back in after the RO membrane strips them out along with contaminants.
  • Tank vs. tankless: Traditional systems use a pressurized storage tank under the sink so filtered water is ready on demand; tankless designs filter on demand instead, trading some flow-rate characteristics for a smaller footprint.
  • Filter replacement schedule: The maker specifies a replacement interval for each filter stage and the membrane separately; sediment and carbon filters generally need more frequent replacement than the membrane itself.
  • Installation space: Tank-based systems need more under-sink cabinet space for the tank itself, which matters in smaller kitchens or apartments.

Express Water RO System Tiers at a Glance

Tier Best for Key stated specs Limits
Standard 5-stage under-sink RO Most households wanting basic RO-filtered drinking water Sediment + carbon pre-filters, RO membrane, post-carbon polish stage, pressurized storage tank No remineralization; water from RO membranes is typically low in dissolved minerals
10-stage / alkaline RO system Buyers who want minerals added back and extra filtration passes Additional pre/post filter stages plus an alkaline or remineralization cartridge More filter cartridges to track and replace on schedule; larger under-sink footprint
Tankless RO system Smaller cabinets, apartments, buyers who want faster on-demand flow No bulky storage tank, compact under-sink unit Depends on incoming water pressure for performance; still needs the same filter stages replaced on schedule
Whole-home or high-capacity RO system Larger households or higher daily water-use needs Higher stated daily output capacity than under-sink models Larger install footprint, typically needs more involved plumbing setup

Pick X If…

If you… Choose…
Just want cleaner-tasting tap water with minimal fuss Standard 5-stage under-sink RO
Want minerals restored after filtration 10-stage / alkaline RO system
Have a small or crowded under-sink cabinet Tankless RO system
Need higher daily filtered-water volume for a larger household Whole-home or high-capacity RO system

Fit and Installation Notes

Before buying, check the under-sink cabinet’s available space against the system’s stated footprint, especially for tank-based tiers, since the pressurized tank is often the largest single component. Incoming water pressure matters more for tankless designs, so checking the household’s supply pressure against the maker’s stated minimum requirement avoids a slow-flow surprise after install. Most under-sink RO systems tap into the cold water supply line and route a separate small faucet to the countertop, so installation generally requires basic plumbing comfort or a licensed plumber, particularly for anyone not wanting to drill an extra faucet hole in the countertop or sink.

Maintenance Reality Check

RO systems are filter-replacement products by design: the sediment and carbon stages typically need changing on a schedule measured in months, while the RO membrane itself is rated for a longer interval, often a year or more depending on water quality and usage. Skipping the maker’s replacement schedule is commonly cited by reviewers as the cause of declining water taste or flow rate over time, so budgeting for ongoing filter costs is part of owning any RO system, not just the upfront unit price.

Alternatives Worth Knowing

  • Other under-sink RO brands: Several other water-filtration makers sell comparable multi-stage RO systems with similar tank and tankless formats, worth comparing on stage count and replacement filter cost.
  • Countertop RO units: For renters or anyone who doesn’t want to modify under-sink plumbing, countertop RO systems filter water without a permanent installation, trading counter space for simpler setup.
  • Whole-house carbon or sediment filtration: For households more concerned with general water quality than drinking-water-specific purification, a whole-house filter addresses the whole water supply rather than a single tap, though it does not reduce dissolved solids the way an RO membrane does.

Frequently Asked Questions

Does reverse osmosis remove too many good minerals from water?

RO membranes reduce dissolved solids broadly, including minerals, which is why some buyers choose a remineralization or alkaline-stage system to add minerals back after filtration. Whether this matters for a given household is mostly a taste and personal-preference question rather than a health requirement, since most people get the bulk of their mineral intake from food, not water.

How often do I need to change the filters?

Each stage has its own maker-stated replacement interval, with sediment and carbon filters generally needing more frequent changes than the RO membrane itself. Following the specific schedule printed in that system’s manual, rather than guessing, is the most reliable way to keep water quality and flow rate consistent.

Why is my tankless RO system’s flow slower than I expected?

Tankless systems depend more directly on incoming water line pressure since there’s no pressurized storage tank buffering the output. If flow seems slow, checking the home’s water pressure against the system’s stated minimum requirement is a reasonable first step before assuming the filters are at fault.

Can I install an RO system myself?

Many under-sink RO kits are designed for a motivated DIY installer with basic plumbing tools, and the manufacturer’s manual walks through connecting to the cold water line and installing the dedicated faucet. Anyone uncomfortable with that work, or dealing with unusual existing plumbing, is better served by hiring a licensed plumber for the install.

Is RO-filtered water safe for everyone, including infants?

RO filtration is generally considered an effective way to reduce many contaminants, but specific health questions, including about mineral content for infant formula preparation, should be directed to a pediatrician or doctor rather than assumed from general filtration marketing. Local water quality also varies, so testing the specific water supply is a reasonable step for anyone with particular health concerns.

What’s the difference between a 5-stage and a 10-stage system in practice?

The extra stages in a higher-count system are generally additional sediment, carbon, or remineralization passes layered around the same core RO membrane process, not a fundamentally different filtration technology. Buyers mainly choosing between the two should weigh whether they want minerals added back in and whether they’re willing to track and replace more filter cartridges on schedule.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.