Key takeaways
- Mittens suit cold-climate skiers and beginners who dismount often and want maximum warmth, while five-finger gloves suit snowboarders, instructors, and anyone who needs grip on zippers, straps, and phone screens. Resort riders in moderate cold do well with an insulated,…
Mittens suit cold-climate skiers and beginners who dismount often and want maximum warmth, while five-finger gloves suit snowboarders, instructors, and anyone who needs grip on zippers, straps, and phone screens. Resort riders in moderate cold do well with an insulated, waterproof glove; backcountry skiers and ski-patrol-cold days call for a mitten or a glove-mitten hybrid (“lobster” style) with a removable liner.
How Ski and Snowboard Hand Gear Differs From Everyday Winter Gloves
Snow sports gloves and mittens are built around three jobs that casual winter gloves rarely handle together: staying dry through repeated contact with wet snow, insulating a hand that is often damp with sweat during exertion, and surviving abrasion from chairlift bars, binding straps, and falls. That means a waterproof-breathable insert (often a membrane laminate), a textured or reinforced palm (leather or a synthetic equivalent), a long gauntlet or under-cuff that seals against a jacket sleeve, and a wrist leash so a dropped glove does not slide down the mountain.
Mittens win on raw warmth because fingers share heat instead of each losing it individually. Gloves win on dexterity for buckles, poles, phones, and camera use. Three-finger “lobster” gloves split the difference, grouping the ring and pinky fingers while keeping the index finger and thumb free.
Shell and Insulation Materials, Explained
Outer shells are either a woven nylon or polyester with a durable water-repellent (DWR) finish, or genuine/synthetic leather on the palm and sometimes the whole glove. Leather palms resist abrasion better and grip poles more securely but need periodic reproofing (beeswax-based leather conditioners are common) to stay water-resistant. Fabric shells are lighter and dry faster.
Waterproofing usually comes from an inserted membrane rather than the shell fabric alone; makers commonly reference branded laminates in this category, and some brands use a proprietary insert instead. Insulation is typically synthetic fiberfill, with higher gram-weight fill (for example, a 100g liner versus a 200g liner) signaling more warmth and bulk. Some premium mittens add a thin layer of natural down in the back of the hand, away from contact points, for extra warmth with less bulk.
At a Glance: Glove and Mitten Types
| Type | Best for | Key stated specs | Limits |
|---|---|---|---|
| Insulated waterproof glove (e.g., styles from Hestra, Black Diamond, Burton) | Resort skiers and riders in average winter cold | Membrane insert, leather or synthetic palm, removable liner on many models | Less warm per gram than a mitten of similar bulk |
| Insulated mitten | Cold-sensitive hands, deep-winter resort days, lift-line standing | Shared-finger chamber, longer gauntlet cuffs common | Hard to grip zippers, phones, and small buckles |
| Three-finger “lobster” glove | Riders who want mitten warmth but still need an index finger free | Split-finger panel, usually leather-reinforced palm | Pricier construction; fewer size options than standard gloves |
| Thin liner glove (silk, wool, or synthetic) | Layering under a shell mitten or glove, or warm spring days | Touchscreen-compatible fingertips on many models | Not waterproof or wind-blocking on its own |
| Leather-palm freeride glove | Backcountry and powder days with rope tows or tree runs | Full or reinforced leather construction, wrist leash | Needs periodic leather reproofing |
Warmth Ratings and How to Read Them
Few glove makers publish a precise temperature rating the way sleeping-bag makers do, because hand warmth depends heavily on circulation, activity level, and layering. Instead, most brands group gloves and mittens into tiers such as “light,” “mid-weight,” and “expedition” or similar wording. As a practical guide: light gloves suit spring skiing and warm resort days, mid-weight gloves and three-finger hybrids cover most average winter conditions, and mittens with heavier fill or added down suit sustained cold, high-altitude lifts, and non-stop exposure such as ski patrol or backcountry touring.
Riders who run cold even in mild weather often do better sizing up and adding a thin liner glove underneath, rather than buying the heaviest single glove available — a snug glove with no air gap can actually feel colder than a slightly looser one with a liner, because trapped air is part of the insulation.
Fit and Compatibility Notes
A ski or snowboard glove should fit close enough that there is no loose fabric bunching at the fingertips (which reduces dexterity and can make grip feel numb) but loose enough to wiggle fingers and maintain blood flow. Gauntlet-style cuffs go over a jacket sleeve and help seal out snow during falls; under-cuff styles tuck inside the sleeve and work better for riders who prefer a trimmer wrist profile and already have snow-sealing jacket cuffs. Most brands offer gender-specific sizing plus a separate junior line, and hand circumference (measured around the knuckles with a fist loosely made) is the most reliable way to pick a size across brands, since labeled sizes vary by maker.
Touchscreen-compatible fingertips are common on liners and thinner gloves but rare on full mittens; riders who need their phone on the hill should plan to pull a liner glove out rather than expect a heavy mitten to register a tap.
Pick This If…
| Situation | Recommended type |
|---|---|
| You run cold and ski mostly in deep winter | Insulated mitten with a removable liner |
| You snowboard and need to work bindings and straps often | Insulated waterproof glove with a reinforced palm |
| You want mitten warmth but still need an index finger | Three-finger “lobster” glove |
| You ski backcountry or tour and need rope/edge grip | Leather-palm freeride glove with a wrist leash |
| You layer for variable weather or ski mostly in spring | Thin liner glove plus a light shell glove |
Care and Longevity
Air-drying away from direct heat (not on a radiator or in a dryer) protects both the membrane and any leather. Leather palms benefit from an occasional wax or leather-specific waterproofing treatment once the shell starts visibly wetting out instead of beading water. Washing instructions vary by brand and liner type, so the attached care tag is the most reliable source; some removable liners are machine washable while shells generally are not.
Alternatives to Consider
Heated gloves and mitten liners with a rechargeable battery pack are worth a look for anyone with circulation issues or Raynaud’s-type cold sensitivity, though battery life drops in extreme cold and the units add weight and a charging routine. Convertible glove-mitten hybrids, where a flap folds back to expose fingers, offer a middle path for riders who want mitten warmth at rest but full dexterity for brief tasks. Dedicated glove liners paired with an uninsulated outer shell suit people who ski in a wide range of temperatures across a season and would rather carry two light pieces than one heavy one.
Common Mistakes When Buying Ski Gloves and Mittens
Buying based on hand length alone rather than hand circumference is a frequent sizing error, since two gloves labeled the same size from different brands can fit very differently around the palm. Another common mistake is choosing the heaviest, warmest-looking option without considering activity level: a ski instructor or active snowboarder who is constantly moving generates more body heat than a lift-riding skier standing still, so the same glove can feel right for one and clammy for the other. Skipping the wrist leash is also a false economy, since a dropped glove on a chairlift or steep slope is often unrecoverable, and replacing a lost glove mid-season costs more than the minor hassle of clipping a leash each run.
Buyers also sometimes overlook cuff style relative to their jacket. A gauntlet-style glove cuff paired with a jacket that already has tight-fitting sleeve cuffs can bunch awkwardly, while an under-cuff glove paired with a loose jacket sleeve can let snow in at the wrist. Trying the glove or mitten on with the jacket that will actually be worn, rather than judging fit in isolation, avoids this mismatch.
Frequently Asked Questions
Are mittens actually warmer than gloves?
For the same amount of insulation, mittens generally run warmer because the fingers share one air pocket and radiate less heat than when separated. That is why cold-sensitive skiers and very young children are often steered toward mittens over gloves. The tradeoff is dexterity, since mittens make it harder to grip poles, zippers, or a phone.
What size should I buy if I run cold?
Sizing up slightly and adding a thin liner glove is usually more effective than buying the warmest single glove in your normal size, because a liner adds a second air gap and lets you adjust warmth by removing or adding it. A glove that fits too snugly can restrict circulation and end up feeling colder on the hill.
Do I need a separate glove for snowboarding versus skiing?
Not strictly, but snowboarders tend to prefer gloves over mittens because they spend more time adjusting bindings, straps, and boots by hand, especially while seated on snow. Skiers who use poles also benefit from a defined index finger and thumb, which is part of why five-finger gloves and three-finger lobster styles are common among both groups on resort days.
How do I know if a glove is actually waterproof or just water-resistant?
Makers that use an inserted waterproof-breathable membrane typically state it on the product page or tag; a glove relying only on a water-repellent coating on the shell fabric will wet through faster in slush or deep powder. If the listing does not mention a membrane insert, it is reasonable to assume the glove is water-resistant rather than fully waterproof.
How often should I reproof a leather-palm glove?
A common sign it is time is when water stops beading on the leather and instead soaks in; at that point a leather-specific waterproofing treatment restores most of the water resistance. Riders who use their gloves several days a week in wet snow may need to do this a few times per season, while occasional resort skiers may only need it once a year.
Can I use regular winter gloves instead of ski-specific ones?
Everyday winter gloves can work for occasional, mild-weather sledding or short outings, but they usually lack the reinforced palm, long gauntlet cuff, and dedicated waterproof membrane that ski and snowboard gloves use, so they tend to wet through and wear out faster under lift bars, bindings, and repeated falls. For regular time on snow, a glove or mitten built specifically for skiing or snowboarding holds up better and stays warmer.
Related guides